Broomz 10 Step Cleaning Program
Every great carpet cleaning experience starts with a proper
pre-inspection. Our service technician will inspect your
particular areas of concern, as well as note your carpets
construction and condition. He will also advise you of any
possible permanent staining.
2) Commercial Pre-vacuum
Removing dry soil is one of the most important steps in
cleaning. The carpet is thoroughly pre-vacuumed to remove
as much dry soil as possible.
All areas will be pre-treated with special emphasis on spots
and spills. This will help lift the soil and prepare for
If necessary, agitation will be performed with a machine
or by hand (depending on carpe type and soil levels) to
further loosen traffic area soil.
5) Portable Hot Water Extraction Systems
This thorough rinsing action flushes the dirt and soil out
of the carpet pile. Pressure is regulated so that carpet
is not over-wet. Hot water is kept between 160 and 200 degrees,
which aids in sanitization.
6) Move Furniture
Light Sofas, tables and chairs will be moved. After cleaning
under these items, each piece will be put back in its original
position and Styrofoam blocks or plastic tabs will be put
underneath if necessary. Beds, dressers, and heavier pieces
of furniture are left in place.
7) Post Spotting
If any difficult spots remain our technician will use one
or more of our many specialty spot removal products to attempt
removal. If a spot is removable, we are equipped to take
it out. Please note that certain spots are not removable
and are considered a permanent stain.
8) Speed Drying
Some carpets (not all) benefit from an additional drying
process, as we finish each area, air movers may be placed
on the carpet to promote fast drying.
9) Carpet Grooming
The carpet pile is set in one direction so that the fibers
are in the best position for drying and ultimate visual
appeal. Please note that not all styles of carpet require
grooming. Your technician will be able to identify your
carpet style and if it needs grooming.